Epson RC90 User Manual

Maintenance 9. Troubleshooting
No. Message Remedy Note 1 Note 2
1503
Disconnection while executing a task.
1504
Communication disconnection
between Remote Ethernet and
Controller. Re-establish
communication.
-
1505
Communication disconnection
between Remote RS232 and
Controller. Re-establish
communication.
-
1510
Out of IP Address range.
1521
Vision communication.
Initialization failed.
1522
Vision communication.
Termination failed.
1523
Vision communication.
Socket handle acquisition failed.
1524
Vision communication.
Communication failed.
1526
Vision communication.
Sending failed.
1527
Vision communication.
Failed to read from the server.
1528
Vision communication.
Option setting failed.
1529
Vision communication.
Initialization process not completed.
1530
Vision communication.
Communication error.
Communication with the server not
completed.
1531
Vision communication.
Sockets are all used.
1532
Vision communication.
Sending time-out.
1533
Vision communication.
Receiving time-out.
1534
Vision communication.
Communication error.
1550
Communication failure.
Ethernet initialization error.
1551
Communication failure.
USB initialization error.
1552
Communication failure.
Controller internal communication
error.
1553
Communication failure.
Invalid data is detected.
1555 Ethernet transmission error.
Check the connection between the
EPSON RC+7.0 and controller.
1556 Ethernet reception error.
Check the connection between the
EPSON RC+7.0 and controller.
1557 USB transmission error.
Check the connection between the
EPSON RC+7.0 and controller.
1558 USB reception error.
Check the connection between the
EPSON RC+7.0 and controller.
RC90 (EPSON RC+ 7.0) Rev.4
124

Epson RC90 Specifications

General

Brand	Epson
Model	RC90
Category	Controller
Language	English