Epson RC90 - Page 152

Maintenance 9. Troubleshooting
No. Message Remedy Note 1 Note 2
2252
Cannot allocate enough memory for
ByRef.
Reduce the number of array's subscripts
to be seen by ByRef.
2253
Cannot compare characters with
values.
Check whether the string type and the
numeric data type are not compared.
Review the program.
2254
Specified data is beyond the array
bounds.
Cannot refer or update
beyond the array bounds.
Check the number of array's subscripts
and data. Review the program.
The number of
array subscripts
The number
of data to be
referred or
updated
2255
Variable overflow or underflow.
Specified variable is out of value
range.
The value that exceeds the range of
Double type is specified. Review the
program.
2256
Specified array subscript is beyond the
maximum allowed range.
Reduce the number of subscripts to be
specified. For available subscripts, see
the online help.
2260
Task number is out of
the available
range.
For available task number, see the online
help. Review the program.
The specified
task number
2261 Specified task number does not exist. Review the program.
The specified
task number
2262
Robot number is out of the available
range.
The available Robot number is 1.
Review the program.
The specified
robot number
2263
Output number is out of the available
range.
The Port No. or the Device
No. is out of the available range.
For available output number, see the
online help. Review the program.
The specified
output number
2264
Command argument is out of the
available range.
Check the
arguments.
Added data 1: Passed
value. Added data 2: argument order.
For available range of argument, see the
online help. Review the program.
The Added
value
What number
argument?
2265
Joint number is out of the available
range.
Available Joint number is from 1 to 6.
Review the program.
The specified
joint number
2266 Wait time is out of available range.
Available wait time is from
0 to
2147483. Review the program.
The specified
wait time
2267
Timer number is out of available
range.
Available timer number is from 0 to 15.
Review the program.
The specified
timer number
2268 Trap number is out of available range.
Available trap
number is from 1 to 4.
Review the program.
The specified
trap number
2269 Language ID is out of available range.
For available language ID, see the online
help. Review the program.
The specified
language ID
2270
Specified D parameter value for the
parallel process is out of available
range.
Available D parameter value is from 0 to
100. Review the program.
The specified
D parameter
value
2271 Arch number is out of available range.
Available arch number is from 0 to 7.
Review the program.
The specified
arch number
2272 Device No. is out of available range.
The specified number representing a
control device or display device is out of
available range. For available device
number, see the online help. Review
the program.
The specified
device number
2273 Output data is out of available range.
Available output data value is from 0 to
255. Review the program.
Output data
What number
byte data is out
of range?
RC90 (EPSON RC+ 7.0) Rev.4
136