Epson RC90 - Page 166

Maintenance 9. Troubleshooting
No. Message Remedy Note 1 Note 2
3188
Call command cannot be used in
parallel processing.
3189
Local variables cannot be used with
the Wait command.
3190 Array variables cannot be used with
the Wait command.
3191 Real variables cannot be used with the
Wait command.
3192 String variables cannot be used with
the Wait command.
3193
Vision object name is missing.
3194
Cannot use Boolean value for the
timeout value.
3195
(not used)
3196
Fend statement was not found.
3197
Numeric variable name cannot use '$'.
3198
String variables must have '$' suffix.
3199
Invalid object was specified.
3200
Value is missing.
3201
Expected ' , '.
3202
Expected ' ( '.
3203
Expected ' ) '.
3204
Identifier is missing.
3205
Point is not specified.
3206 Event condition expression is missing.
3207 Formula is missing.
3208 String formula is missing.
3209 Point formula is missing.
3210 Line label was not specified.
3211 Variable was not specified.
3212 Corresponding Fend cannot be found.
3213 Expected ' : '.
3214 True/False was not specified.
3215 On/Off was not specified.
3216 High/Low was not specified.
3217 Input bit label was not specified.
3218 Input byte label was not specified.
3219 Input word label was not specified.
3220 Output bit label was not specified.
3221 Output byte label was not specified.
3222 Output word label was not specified.
3223 Memory bit label was not specified.
3224 Memory byte label was not specified.
3225 Memory word label was not specified.
3226 User error label was not specified.
3227 Function name was not specified.
3228 Variable type was not specified.
3229
Invalid Trap statement parameter.
Use Goto, Call, or Xqt.
3230 Expected For/Do/Function.
RC90 (EPSON RC+ 7.0) Rev.4
150