Epson RC90 - Page 168

Maintenance 9. Troubleshooting
No. Message Remedy Note 1 Note 2
3267
Task type was not specified.
3268
Form name was not specified.
3269
Property Name or Control Name was
not specified.
3270
Property Name was not specified.
3271
BackColorMode was not specified.
3272
BorderStyle was not specified.
3273
DropDownStyle was not specified.
3274
EventTaskType was not specified.
3275
ImageAlign was not specified.
3276
IOType was not specified.
3277
FormBorderStyle was not specified.
3278
ScrollBars was not specified.
3279
SizeMode was not specified.
3280
StartPosition was not specified.
3281
TextAlign was not specified.
3282
TextAlign was not specified.
3283
TextAlign was not specified.
3284
WindowState was not specified.
3285
J1FLAG was not specified.
3286
J2FLAG was not specified.
3287
robotID was not specified.
3288
robotID/All was not specified.
3289
areaID was not specified.
3290
File number was not specified.
3291
MemBlock ID was not specified.
3292
Database type was not specified.
3293
Disk type was not specified.
3294 Variable type was not specified.
3295 Conveyor area ID was not specified.
3296
Database file number was not
specified.
3297
Vision calibration name was not
specified.
3298
Vision object type ID was not
specified.
3299
Shutdown mode ID was not specified.
3301
Version of linked OBJ file does not
match.
Not all project files are compiled in the
same version. Perform the rebuild.
3302
Linked OBJ file does not match the
compiled I/O label.
The project configuration has been
changed. Perform the rebuild.
3303
Linked OBJ file does not match the
compiled user error label.
The project
configuration has been
changed. Perform the rebuild.
3304
Linked OBJ file does not match the
compiled compile option.
The project configuration has been
changed. Perform the rebuild.
3305
Linked OBJ file does not match the
compiled link option.
The
project configuration has been
changed. Perform the rebuild.
RC90 (EPSON RC+ 7.0) Rev.4
152