Epson Stylus Color 1520 User Manual

Using Optional Interfaces
A-4
7. Connect the proper interface cable to the interface board
and to your computer. If the cable has a grounding wire,
connect it to one of the screws securing the interface board.
8. Reconnect any other interface cables you disconnected.
9. Make sure the printer is turned off. Then plug in the power
cord and turn on the printer.
In most cases, the printer automatically detects the interface
you’re using. However, if you have trouble printing through an
installed interface board, you may need to change the printer’s
I/F (interface) mode setting using default-setting mode. See
page 5-3 for instructions.
To remove the interface board, first follow steps 1 and 2 in this
section. Remove the screws securing the board and carefully
pull it out of the internal printer socket. Then replace the
interface cover and screws you removed in step 3. Now you can
connect your printer using one of the built-in interfaces as
described in your Quick Setup booklet.
intface.fm5 Page 4 Friday, May 9, 1997 2:13 PM

Epson Stylus Color 1520 Specifications

General

Color	Yes
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Maximum input capacity	100 sheets
Envelopes sizes	10, C5, DL
Standard media sizes	4\
Paper tray media types	Envelopes, Labels, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
ISO B-series sizes (B0...B9)	B5
Power requirements	120V AC, 50/60 Hz
Printing noise level	45 dB
Maximum operating temperature range (T-T)	-20 - 60 °C
Market positioning	Home & office