Printing on Special Media
3-27
Printing a Banner from Windows
Follow these steps to print a banner or other custom-size project
from a Windows application:
1. Create the document in your word processor or other
application software.
2. Choose
Print or Print Setup from the File menu. You see a
printing dialog box for your application.
3. Make sure your printer is selected, and then click the
Printer, Setup, Properties, or Options button. (You may
have to click a series of these buttons, depending on your
software.) You see the Main printer settings dialog box, as
shown on page 1-2.
4. Click the
Paper tab. You see a dialog box like the
following:
5. If you’re printing on roll paper, select
Manual Feed
Slot (Banner)
from the Paper Source list. Go to step 6.
If you’re printing a banner on continuous computer paper,
select
Tractor Feeder for the Paper Source. Go to step 7.
Click to select a
paper size
Click to select a
paper source
media.fm5 Page 27 Friday, May 9, 1997 1:50 PM
To Next Page
Loading...
