Epson Stylus Color 1520 User Manual

B-1
B
You can use the EPSON Plot! program to open and scale HPGL
or HPGL/2 plotter files and then print them on your printer.
Follow the instructions in this Appendix to install the program
and print with
EPSON Plot! and your Windows printer driver.
You can install and use
EPSON Plot! on any system running
Windows 3.1, Windows 95, or Windows NT (3.51 or 4.0).
Make sure to connect the printer to that system and install the
printer software following the instructions in the Quick Setup
booklet before you begin.
Installing EPSON Plot!
Follow these steps to install EPSON Plot! on the system
connected to the printer:
1. Make sure Windows is running, but no applications are
open.
2. Insert the
EPSON Plot! Disk 1 diskette in a drive.
3. With Windows 3.1 or Windows NT 3.51 Program
Manager, open the File menu and click
Run.
With Windows 95 or Windows NT 4.0, click
Start, then
click
Run.
4. Type
A:\SETUP or B:\SETUP and click OK.
Using
EPSON Plot!
Note:
You can also install
EPSON Plot! from the
printer software
CD-ROM.
eplot.fm5 Page 1 Friday, May 9, 1997 2:14 PM

Epson Stylus Color 1520 Specifications

General

Color	Yes
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Maximum input capacity	100 sheets
Envelopes sizes	10, C5, DL
Standard media sizes	4\
Paper tray media types	Envelopes, Labels, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
ISO B-series sizes (B0...B9)	B5
Power requirements	120V AC, 50/60 Hz
Printing noise level	45 dB
Maximum operating temperature range (T-T)	-20 - 60 °C
Market positioning	Home & office