Epson Stylus Color 1520 User Manual

Printing on Special Media
3-35
Printing a Backlit Display on a Macintosh
1. Create the document in your word processor or other
application software.
2. Choose
Page Setup from the File menu.
3. Choose the
Paper Source you’re using, either Auto Sheet
Feeder
(for the built-in sheet feeder) or Manual Feed
Slot
(for the manual feeder).
4. Then select the size of your back light film in the
Paper Size option. Click OK.
5. Choose
Print from the File menu or click the print icon in
your application. You see the printing dialog box (as shown
on page 1-9).
6. Select
Ink Jet Back Light Film as the Media Type setting.
This chooses the best printer driver settings for printing on
back light film and automatically turns on the
Flip
Horizontal
feature so your image will appear correctly
when viewed from the reverse side.
7. Check the rest of the printer software settings as described
in Chapters 1 and 2. Then click
Print to print your backlit
display
.
Note:
If you change any other
printer software
settings, make sure the
Flip Horizontal setting is
still selected before you
print.
media.fm5 Page 35 Friday, May 9, 1997 1:50 PM

Epson Stylus Color 1520 Specifications

General

Color	Yes
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Maximum input capacity	100 sheets
Envelopes sizes	10, C5, DL
Standard media sizes	4\
Paper tray media types	Envelopes, Labels, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
ISO B-series sizes (B0...B9)	B5
Power requirements	120V AC, 50/60 Hz
Printing noise level	45 dB
Maximum operating temperature range (T-T)	-20 - 60 °C
Market positioning	Home & office