Custom Printing
2-4
8. Check the Current Settings box on the bottom of the menu
to see if the other settings are correct for your document.
If they’re correct, click
OK
or
Print
. (If you’re using
Windows, click any other buttons that your application
uses for printing.)
If the predefined settings are not quite what you want,
follow the steps in the next section to change them.
Customizing Print Quality and
Special Effects
If you need maximum control over your project, or you want to
experiment with special effects, you can adjust individual
settings in your printer software. Follow these steps:
1. Create your document, image, or project in your
application software.
2. Access the Main printer settings dialog box as described on
page 1-2 (Windows) or page 1-9 (Macintosh).
3. Click
Advanced, and then click More Settings. You see
the More Settings dialog box:
Note:
If you’re printing with
WIndows NT 3.51,
follow the steps in the
next section to check an
additional print option
described on page 2-7.
Note:
After you customize your
print settings for a special
project, you can save
them as a group. Then
you can reuse them
whenever you print a
similar project. See
page 2-11 for instructions.
Windows
Some of these options
are automatically set or
disabled by other settings
you choose
custom.fm5 Page 4 Friday, May 9, 1997 1:45 PM
To Next Page
Loading...
Need help?
General
