Printing on Special Media
3-26
10. Grasp both sides of the roll and slowly unroll the paper into
the slot in the manual feeder.
When the roll paper is fully inserted, the printer pulls it in
and loads it automatically. (If the paper is crooked, press
the
Load/Eject button to unload it and try again.)
11. Before you print, raise the cutting guide to an upright
position so the roll paper feeds beneath it.
12. Follow the instructions in the next sections to print your
banner on either a Windows computer or a Macintosh.
media.fm5 Page 26 Friday, May 9, 1997 1:50 PM
To Next Page
Loading...
