Specifications
C-4
Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at
any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always
test samples of paper stock before purchasing large quantities or printing large jobs.
Poor quality paper may reduce print quality and cause paper jams and other problems. If you
encounter problems, switch to a higher grade of paper.
Ink jet paper, envelopes, glossy film, glossy paper, transparencies, and self adhesive sheets are
usable only under these conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
EPSON Photo Quality Glossy Film and Photo Quality Self Adhesive Sheets should be stored under
these conditions:
Temperature: 59 to 86 °F (15 to 30 °C)
Humidity: 20 to 60% RH
Printable areas
Note:
The maximum printable width is 13.6 inches (345 mm) regardless of the paper size or feeder you
use.
Single sheets and
index cards
A: The minimum top margin is 0.12 inch (3.0 mm).
When loading multiple sheets of EPSON Photo Quality Glossy Film,
the minimum top margin is 1.2 inches (30 mm).
BL: The minimum left margin is 0.12 inch (3.0 mm); except for A3
landscape, A2 portrait, Ledger landscape, and US C portrait, which
are 0.98 inch (25 mm).
BR: The minimum right margin is 0.12 inch (3.0 mm); except for A3
landscape and A2 portrait, which are 2 inches (50 mm), and Ledger
landscape and US C portrait, which are 2.4 inches (62 mm).
C: The minimum bottom margin is 0.55 inch (14.0 mm).
Paper type Size Paper types Thickness Weight
Continuous
label paper
Minimum size each backing
sheet:
4 to 16 inches × 4 inches
(101.6 to 406.4 × 101.6 mm)
Minimum label size:
2.5 × 0.94 inches
(63.5 × 23.9 mm)
Plain continuous
label paper
Maximum total
thickness:
0.0079 inch (0.2 mm)
Maximum label
thickness:
0.0047 inch (0.12 mm)
—
A
BL
BR
C
specs.fm5 Page 4 Friday, May 9, 1997 2:15 PM
To Next Page
Loading...
Need help?
General
