Printing on Special Media
3-4
1
If you’re printing from DOS, see Chapter 5 for printing instructions.
2
With multiple sheets loaded, the minimum top margin is 1.2 inches (30 mm). For a smaller top
margin or for ease in loading, load and print one sheet at a time with a support sheet beneath it.
3
Turn on the Flip Horizontal option to reverse your image before you print it—especially if it
includes text—so the image will appear correctly when it’s transferred. See Chapter 2 for
instructions. After you print, follow the instructions that came with the paper to iron the image
onto the shirt or other item.
EPSON Photo Quality Ink Jet Cards 30 cards
1
Photo Quality Ink Jet Paper
EPSON 720 dpi Index Cards
EPSON Photo Quality Self Adhesive
Sheets
See “Loading Paper in the
Manual Feeder” on
page 3-11.
EPSON Photo Quality Banner Paper See “Loading Roll Paper”
on page 3-22.
EPSON Photo Quality Glossy Paper
(use with support sheet)
20 sheets Photo Quality Glossy Paper
EPSON Photo Quality Glossy Film
(use with support sheet)
30 letter size
2
1 A2 size
Photo Quality Glossy Film
EPSON High Quality Glossy Paper
(use with support sheet)
30 letter size
2
1 A2 size
EPSON Iron-On Transfer Paper
3
1 sheet
EPSON Ink Jet Transparencies (use
with support sheet)
30 sheets Ink Jet Transparencies
EPSON Ink Jet Back Light Film See “Loading Back Light
Film” on page 3-33.
Ink Jet Back Light Film
EPSON Ink Jet Canvas Cloth See “Loading Roll Paper”
on page 3-22.
Ink Jet Canvas Cloth
When you load media with this
name . . .
Load a maximum of this
many sheets in the
built-in sheet feeder as
described on page 3-6 . . .
Then select this Media
Type setting in your printer
software . . .
media.fm5 Page 4 Friday, May 9, 1997 1:48 PM
To Next Page
Loading...
Need help?
General
