Epson Stylus Color 1520 User Manual

Printing on Special Media
3-19
2. Tear off the printed pages at the perforation by pulling it
across the tear-off edge.
If the paper’s perforation isn’t at the printer’s tear-off edge,
adjust the tear-off position as described on page 3-21. Do
not perform step 3.
3. Press the
Load/Eject button to feed the rest of the
continuous paper backward to the paper-park position so
it’s ready for printing the next time you need it.
If the ink smears on your document, set the thickness lever
to the + position and reprint; see page 3-7.
If your margins are not where you want them, adjust them
in your application software. However, if you need to
adjust your paper’s loading position, you can change it
using the
Micro Adjust buttons. See the next section for
instructions.
tear-off edge
Caution:
Never press Load/Eject
when you have
continuous label paper
loaded in the printer. This
would feed labels
backward, causing them
to peel off inside the
printer.
media.fm5 Page 19 Friday, May 9, 1997 1:50 PM

Epson Stylus Color 1520 Specifications

General

Color	Yes
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Maximum input capacity	100 sheets
Envelopes sizes	10, C5, DL
Standard media sizes	4\
Paper tray media types	Envelopes, Labels, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
ISO B-series sizes (B0...B9)	B5
Power requirements	120V AC, 50/60 Hz
Printing noise level	45 dB
Maximum operating temperature range (T-T)	-20 - 60 °C
Market positioning	Home & office