Epson Stylus Color 670 Service Manual

EPSON Stylus COLOR 670 Revision A
Adjustment Adjustment 102
6. Adjust until the thickness gauge stars moving with the carriage. From the
point where the thickness gauge stars moving with the carriage, move the
Right Parallelism Adjust Bushing by one notch toward you. (Gap will be
widen.)
At this point, make sure that the thickness gauge does not move.
Figure 5-2. Paper Gap Adjustment -Adjusting Method
7. Perform the same procedures above (from 1 to 6) for the Left Parallelism
Adjust Bushing.
o Check the Gap
After completing the adjustment for Left Parallelism Adjust Bushing,
check the PG at the right side one more time.
o Fixing right/ Left Parallelism Adjust Bushing
After completing the PG adjustment, fix the Right/ Left Parallelism
Adjust Bushing with screws.
Standard Position
Forward =
Gap widens
Backward =
Gap narrows
Side frame
+ side
- side
PG Lever
Right parallelism
adjustment
bushing

Epson Stylus Color 670 Specifications

General

Brand	Epson
Model	Stylus Color 670
Category	Printer
Language	English