Epson Stylus Color 670 Service Manual

EPSON Stylus COLOR 670 Revision A
Disassembly and Assembly Disassembly 85
4.2.5.5 ASF Assembly Removal
1. Remove the Housing. (See “Housing Removal” on page 72)
2. Release the hook and remove the Spur Gear 34 from the Roller Shaft of
the ASF Assembly.
Figure 4-21. Spur Gear 34
3. Remove the cable from the Cable Hook of the ASF Assembly.
(The Cable Hook is located at the right side seen from the back side of the
printer.)
4. Remove 1 screw (with washer) securing the ASF Assembly to the Printer
Mechanism and ASF securing screw.
Figure 4-22. ASF Securing Screw Removal
5. Shift the ASF Assembly to the right (seen from the back side of the
printer) and while lifting the Sub Paper Support, remove the ASF
Assembly to the back side of the printer.
Figure 4-23. ASF Assembly Removal
Spur Gear 34 Securing Hook
Cable Hook
Spur Gear 34
Securing Screw with Washer
ASF Securing Screw
Sub Paper Support
Shift the ASF to the right

Epson Stylus Color 670 Specifications

General

Brand	Epson
Model	Stylus Color 670
Category	Printer
Language	English