Epson Stylus Color 670

EPSON Stylus COLOR 670 Revision A
Disassembly and Assembly Overview 67
4.1 Overview
This section describes procedures for disassembling the main components of
EPSON Stylus COLOR 670. Unless otherwise specified, disassembly units or
components can be reassembled by reversing the disassembly procedure.
Things, if not strictly observed, could result in injury or loss of life are
described under the heading “Warning”. Precautions for any disassembly or
assembly procedures are described under the heading “Caution”. Chips for
disassembling procedures are described under the heading “Check Point”.
Any adjustment required after disassembling the units are described under
the heading “Adjustment Required”. When you have to remove any units or
parts that are not described in this chapter, refer to the exploded diagrams in
the appendix.
Read precautions below before starting.