Epson T-B Series User Manual

T3-B T6-B Manipulator 15. SD Card Slots
134 T-B series Rev.1
15. SD Card Slots
CAUTION

Do not use any SD card other than accessories.
If using other SD card, system may not operate properly.

SD card is only available for robot system.
SD card is written only for robot system. Unable to use for reading/writing data.
If you write data on SD card, robot system may not operate properly.

Replacing SD card should be performed by a person who has taken proper
training. For details, refer to “Safety Manual Training”.
SD card slot
(Option slot: inside)
(Illustration: T3-B401S)
SD card slot is a slot for inserting SD card.
Firmware to operate the manipulator is written on SD card.
Reference: T-B series Maintenance Manual 14.3 Replacement of SD card

Epson T-B Series Specifications

General

Brand	Epson
Model	T-B Series
Category	Robotics
Language	English