144
Print quality for bar-
codes is poor
The width of the bars
has not been cor-
rected.
The width of the bars has to be cor-
rected to print barcodes correctly.
Use the barcode and 2D symbol
fonts that are installed with the
printer driver, or a barcode genera-
tor application to correct the width
of bars.
To be more precise, decrease one
pixel from the bars and increase
one pixel for the space between
bars.
For more information on the bar-
code generator application you
are using, see the manual supplied
with the application.
The width of the bars is not cor-
rected for the 2D symbols.
No. 6
Depending on the
paper you are using,
ink amount used to
maintain the barcode
print quality may vary.
Set [Ink Profile].
On the [General] tab, select
[Advanced] from [Print Settings],
click [Advanced...] and then select
[Ink Profile and Brightness Adjust-
ment]. Set [Ink Profile] correctly.
For appropriate [Ink Profile] settings,
contact your dealer. (See "How to
Make Media Settings" on page
174.)
You can also use the BSF file to set
[Ink Profile]. See "Exporting/Import-
ing Printer Driver Settings" on page
88.
-
The print result may be
blurry depending on
the thickness of the
paper being used.
Adjust the misalignment of bidirec-
tional printing.
On the [Printer Utilities] tab, select
[Printer Setting Utility]. When the
PrinterSetting screen is displayed,
click [Printer Adjustment] - [Print
Head Alignment] - [Bi-directional
Printing Adjustment].
See "Print Head Alignment" on
page 137.
-
Trouble Description Recovery method
Image/
Illustra-
tion
To Next Page
Loading...
Need help?
General
