Chapter 3 Handling
143
3
Print quality for bar-
codes is poor
The shutters on the
platen on the outer
side of the paper are
set to open.
When the shutters on the platen on
the outer side of the paper are set
to open, air current may cause
printing trouble; outer edges of the
print result may become blurry.
Follow the instructions on the label
on the top of the printer, and set
the shutters on the platen.
See "Shutter Adjustment" on page
40.
No. 5
The paper you are
using differs from the
paper set in the
[Media Type].
Check the paper you are using and
the [Media Type] settings.
For more information, see step 9 in
"Replacing Roll Paper with Fanfold
Paper" on page 66, or step 10 in
"Replacing Fanfold Paper with Roll
Paper" on page 76.
-
The resolution for the
printer and print data
do not match.
If the resolution for the printer and
print data do not match, barcodes
may not be printed correctly.
Match the resolution for the printer
and print data.
For TM-C3500, the resolution for print
data is set to 360 dpi for all [Print
Settings].
For more information on the bar-
code generator application you
are using, see the manual supplied
with the application.
-
Trouble Description Recovery method
Image/
Illustra-
tion
To Next Page
Loading...
Need help?
General
