146
Auto Fit Page is not
available
The Auto Fit Page func-
tion is available for TM-
C3400, but it is not
available for TM-
C3500.
For thermal label printers, the label
size is generally considered as
“printable area”, however for TM-
C3400, it is considered as “label
size” - “margins” = printable area.
Therefore, TM-C3400 comes with
the Auto Fit Page function so that
the same paper layout can be
used even when the printable area
is smaller.
To be more precise, when [Auto Fit
Page] is enabled, the size including
the margins is reduced to fit the
printable area.
For TM-C3500, enable [Borderless
Printing] to match the “label size”
and “printable area”.
Enable [Borderless Printing] if you
want to use the same paper layout
as for the thermal label printer.
-
The print position is mis-
aligned
The paper you are
using differs from the
paper set in the
[Media Layout].
If the paper you are using differs
from the paper set in the [Media
Layout], the image may not be
printed at the correct position.
Set Media Layout correctly.
For more information, see step 9 in
"Replacing Roll Paper with Fanfold
Paper" on page 66, or step 10 in
"Replacing Fanfold Paper with Roll
Paper" on page 76.
-
Trouble Description Recovery method
Image/
Illustra-
tion
To Next Page
Loading...
