Epson WorkForce Pro WF-C879R User Manual

Too many originals are loaded in the ADF.
Solutions
Do not load originals above the line indicated by the triangle symbol on the ADF.
The original slips when paper dust adheres to the roller.
Solutions
Clean the inside of the ADF.
& “Cleaning the ADF” on page 177
Originals are not detected.
Solutions
On the screen for copy or scan, or fax, check that the ADF icon is on. If it is o, place the originals again.
Paper is Not Stacked in Order
The lever on the right side of the output tray has not been pulled.
Solutions
If you pull the lever on the right side of the output tray, the problem may be improved, but the holding
capacity will be reduced.
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed or Eject Correctly
209

Epson WorkForce Pro WF-C879R Specifications

General

Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Scan Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Fax Resolution	Up to 200 x 200 dpi
ADF Capacity	50 sheets
Maximum Paper Size	13" x 19"
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Print Technology	PrecisionCore
Print Resolution	4800 x 1200 dpi
Print Speed (Black)	24 ppm
Print Speed (Color)	24 ppm
Copy Speed	22 ppm (Color)
Copy Resolution	600 x 600 dpi
Mobile Printing	Apple AirPrint, Mopria Print Service
Display	4.3" color touchscreen
Monthly Duty Cycle	Up to 75, 000 pages
Ink Cartridge Configuration	4 individual ink packs (Black, Cyan, Magenta, Yellow)