EasyManuals Logo

Epson WorkForce Pro WF-C879R User Manual

Epson WorkForce Pro WF-C879R
576 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #230 background imageLoading...
Page #230 background image
Connect the computer or smart device to the same SSID as the printer.
A privacy separator on the wireless router is available.
Solutions
Most wireless routers have a privacy separator feature that blocks communication between connected
devices. If you cannot communicate between the printer and the computer or smart device even if they
are connected to the same network, disable the privacy separator on the wireless router. See the manual
provided with the wireless router for details.
The IP address is incorrectly assigned.
Solutions
If the IP address assigned to the printer is 169.254.XXX.XXX, and the subnet mask is 255.255.0.0, the IP
address may not be assigned correctly.
Select Settings > General Settings > Network Settings > Advanced on the printer’s control panel, and
then check the IP address and the subnet mask assigned to the printer.
Restart the wireless router or reset the network settings for the printer.
& “Re-setting the Network Connection” on page 294
There is a problem with the network settings on the computer.
Solutions
Try accessing any website from your computer to make sure that your computer's network settings are
correct. If you cannot access any website, there is a problem on the computer.
Check the network connection of the computer. See the documentation provided with the computer for
details.
The printer has been connected by Ethernet using devices that support IEEE802.3az (Energy
Ecient Ethernet).
Solutions
When you connect the printer by Ethernet using devices that support IEEE802.3az (Energy Ecient
Ethernet), the following problems may occur depending on the hub or router that you are using.
Connection becomes unstable, the printer is connected and disconnected again and again.
Cannot connect to the printer.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Start Scanning
230

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WorkForce Pro WF-C879R and is the answer not in the manual?

Epson WorkForce Pro WF-C879R Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Duplex PrintingYes
Scan TypeFlatbed, ADF
Scan Resolution1200 x 2400 dpi
Fax Speed33.6 Kbps
Fax ResolutionUp to 200 x 200 dpi
ADF Capacity50 sheets
Maximum Paper Size13" x 19"
ConnectivityUSB, Ethernet, Wi-Fi, Wi-Fi Direct
Print TechnologyPrecisionCore
Print Resolution4800 x 1200 dpi
Print Speed (Black)24 ppm
Print Speed (Color)24 ppm
Copy Speed22 ppm (Color)
Copy Resolution600 x 600 dpi
Mobile PrintingApple AirPrint, Mopria Print Service
Display4.3" color touchscreen
Monthly Duty CycleUp to 75, 000 pages
Ink Cartridge Configuration4 individual ink packs (Black, Cyan, Magenta, Yellow)

Related product manuals