EasyManua.ls Logo

Epson WorkForce Pro WF-C879R - Page 431

Epson WorkForce Pro WF-C879R
576 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When printing two or more bar codes on one line, separate the bar codes with a tab, or select a font other than a
BarCode Font and input the space. If a space is input while a Code39 font is selected, the bar code will not be
correct.
Character type Alphanumeric characters (A to Z, 0 to 9) Symbols (- . space $ / + %)
Number of characters No limit
Font size When OCR-B is not used: 26 pt to 96 pt. Recommended sizes are 26 pt, 52 pt and 78 pt.
When OCR-B is used: 36 pt to 96 pt. Recommended sizes are 36 pt and 72 pt.
e following codes are inserted automatically and need not be input by hand:
Le/Right
quiet zone
Check digit
Start/Stop character
Print sample
EPSON Code39 EPSON Code39 CD
EPSON Code39 Num EPSON Code39 CD Num
EPSON Code128
Code128 fonts support code sets A, B, and C. When the code set of a line of characters is changed in the middle
of the line, a conversion code is automatically inserted.
e height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the
Code128 standard. For this reason, it is important to keep at least one space between the bar code and the
surrounding text to prevent overlapping.
Some applications automatically delete the spaces at the end of lines or change multiple spaces into tabs. Bar
codes containing spaces may not be correctly printed from applications that automatically delete spaces from
the ends of lines or change multiple spaces into tabs.
When printing two or more bar codes on one line, separate the bar codes with a tab, or select a font other than a
BarCode Font and input the space. If a space is input while a Code128 font is selected, the bar code will not be
correct.
Character type All ASCII characters (95 in total)
Number of characters No limit
Font size 26 pt to 96 pt. Recommended sizes are 26 pt, 52 pt and 78 pt.
e
following codes are inserted automatically and need not be input by hand:
Le/Right quiet zone
Start/Stop character
Product Information
>
Font Specications
>
Epson BarCode Fonts (Windows Only)
431

Table of Contents

Related product manuals