Epson WorkForce Pro WF-C879R User Manual

Note:
❏ A range of 1.5 mm from the edges of the scanner glass is not scanned.
❏ When originals are placed in the ADF and on the scanner glass, priority is given to the originals in the ADF.
❏ Some sizes may not be automatically detected. In this situation, manually select the size of the originals.
When using the ADF
c
Important:
❏ Do not load originals above the line just under the triangle symbol inside the ADFedge guide.
❏ Do not add originals while scanning.
Note:
❏ You can place originals smaller than A4 size with the long edge facing toward the ADF.
❏ Some sizes may not be automatically detected. In this situation, manually select the size of the originals.
Related Information
& “Originals that are not Supported by the ADF” on page 45
& “Detecting the Original Size Automatically” on page 45
& “Scanner Specications” on page 408
& “ADF
Specications
” on page 409
Placing Originals > Placing Originals
44

Epson WorkForce Pro WF-C879R Specifications

General

Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Scan Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Fax Resolution	Up to 200 x 200 dpi
ADF Capacity	50 sheets
Maximum Paper Size	13" x 19"
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Print Technology	PrecisionCore
Print Resolution	4800 x 1200 dpi
Print Speed (Black)	24 ppm
Print Speed (Color)	24 ppm
Copy Speed	22 ppm (Color)
Copy Resolution	600 x 600 dpi
Mobile Printing	Apple AirPrint, Mopria Print Service
Display	4.3" color touchscreen
Monthly Duty Cycle	Up to 75, 000 pages
Ink Cartridge Configuration	4 individual ink packs (Black, Cyan, Magenta, Yellow)