3.
Check the settings, and then click OK.
Setting Errors
Set the displaying error for the device.
1.
Access Web Cong and select the Print tab > Error Settings.
2.
Set each item.
❏ Paper Size Notice
Set whether to display an error on the control panel when the paper size of the specied paper source is
dierent
from the paper size of the print data.
❏ Paper Type Notice
Set whether to display an error on the control panel when the paper type of the specied paper source is
dierent
from the paper type of the print data.
❏ Auto Error Solver
Set whether to automatically cancel the error if there is no operation on the control panel for 5 seconds
aer displaying the error.
3.
Check the settings, and then click OK.
Setting Universal Print
Set when you print from external devices without using the printer driver.
Some items are not displayed depending on the printing language of your printer.
1.
Access Web Cong and select the Print tab > Universal Print Settings.
2.
Set each item.
3.
Check the settings, and then click OK.
Basic
Items Explanation
Top Oset(-30.0-30.0mm) Sets the vertical position of the paper on which printing starts.
Left Oset(-30.0-30.0mm) Sets the horizontal position of the paper on which printing starts.
Top Oset in Back(-30.0-30.0mm) Sets the vertical position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Left Oset in Back(-30.0-30.0mm) Sets the horizontal position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Check Paper Width Set whether to check paper width when printing.
Skip Blank Page If there is a blank page in the print data, set not to print a blank page.
Administrator Information
>
Settings to Use the Printer
>
Using the Print Functions
449
To Next Page
Loading...
Need help?
General
