Fit to Page:
Automatically reduce or enlarge the document to t to the paper size selected in Output
Paper.
Zoom to:
Prints with a
specic
percentage.
Center:
Prints images in the center of the paper.
Paper Type:
Select the type of paper on which you print. If you select Auto Select (plain papers), printing is
performed from the paper source for which the paper type is set to the following in the printer's
settings.
plain papers, Preprinted, Letterhead, Color, Recycled, High quality plain paper
However, paper cannot be fed from a paper source for which the paper source is set to o in the
printer's Auto Select Settings.
Quality:
Select the pint quality you want to use for printing. Available settings depend on the paper type you
select. Selecting High provides higher quality printing, but the printing speed may be slower.
Paper Source Information:
Displays the paper information set for each paper source.
Orientation:
Select the orientation you want to use to print.
Color:
Select whether to print in color or in monochrome.
2-Sided Printing:
Allows you to perform 2-sided printing.
Settings:
You can specify the binding edge and the binding margins. When printing multi-page
documents, you can select to print starting from either the front or the back side of the page.
Print Density:
Select the document type to adjust the print density. If the appropriate print density is selected,
you can prevent images from bleeding through to the reverse side. Select Manual to adjust the
print density manually.
Multi-Page:
Allows you to print several pages on one sheet or perform poster printing. Click Layout Order to
specify the order in which pages are printed.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
54
To Next Page
Loading...
Need help?
General
