Epson WorkForce Pro WF-C879R User Manual

Items Settings and Explanation
Transport Mode If you only use the printer on the same LAN, select this. IP packets of layer 4 or later are
encrypted.
Tunnel Mode If you use the printer on the Internet-capable network such as IPsec-VPN, select this
option. The header and data of the IP packets are encrypted.
Remote Gateway(Tunnel Mode): If you select Tunnel Mode for Encapsulation, enter a
gateway address between 1 and 39 characters.
Security Protocol
If you select IPsec for Access Control, select an option.
Items Settings and Explanation
ESP Select this to ensure the integrity of an authentication and data, and encrypt data.
AH Select this to ensure the integrity of an authentication and data. Even if encrypting data is
prohibited, you can use IPsec.
Algorithm Settings
It is recommended that you select Any for all settings or select an item other than Any for each setting. If you
select Any for some of the settings and select an item other than Any for the other settings, the device may not
communicate depending on the other device that you want to authenticate.
Items Settings and Explanation
IKE Encryption Select the encryption algorithm for IKE.
The items vary depending on the version of IKE.
Authentication Select the authentication algorithm for IKE.
Key Exchange Select the key exchange algorithm for IKE.
The items vary depending on the version of IKE.
ESP Encryption Select the encryption algorithm for ESP.
This is available when ESP is selected for Security Protocol.
Authentication Select the authentication algorithm for ESP.
This is available when ESP is selected for Security Protocol.
AH Authentication Select the encryption algorithm for AH.
This is available when AH is selected for Security Protocol.
Related Information
& “Conguring Group Policy” on page 545
& “Combination of Local Address(Printer) and Remote Address(Host) on Group Policy” on page 550
& “References of Service Name on Group Policy” on page 550
Administrator Information > Advanced Security Settings > Encrypted Communication Using IPsec/IP Filtering
549

Epson WorkForce Pro WF-C879R Specifications

General

Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Scan Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Fax Resolution	Up to 200 x 200 dpi
ADF Capacity	50 sheets
Maximum Paper Size	13" x 19"
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Print Technology	PrecisionCore
Print Resolution	4800 x 1200 dpi
Print Speed (Black)	24 ppm
Print Speed (Color)	24 ppm
Copy Speed	22 ppm (Color)
Copy Resolution	600 x 600 dpi
Mobile Printing	Apple AirPrint, Mopria Print Service
Display	4.3" color touchscreen
Monthly Duty Cycle	Up to 75, 000 pages
Ink Cartridge Configuration	4 individual ink packs (Black, Cyan, Magenta, Yellow)