Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied Image
e following causes can be considered.
The paper path is dirty.
Solutions
Load and eject paper without printing to clean the paper path.
& “Cleaning the Paper Path for Ink Smears” on page 166
There is dust or dirt on the originals or the scanner glass.
Solutions
Remove any dust or dirt that adheres to the originals, and clean the scanner glass.
& “Cleaning the Scanner Glass” on page 167
The original was pressed with too much force.
Solutions
If you press with too much force, blurring, smudges, and spots may occur.
Do not press with too much force on the original or the document cover.
& “Placing Originals on the scanner glass” on page 51
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “Menu Options for Copying” on page 122
Moiré (Cross-Hatch) Patterns Appear in the Copied Image
Solving Problems
>
Printing, Copying, and Scanning Quality is Poor
>
Copy Quality is Poor
252
To Next Page
Loading...
