If the original is a printed document such as a magazine or a catalog, a dotted moiré pattern
appears.
Solutions
Change the reduce and enlarge setting. If a moiré pattern still appears, place the original at a slightly
dierent angle.
& “Menu Options for Copying” on page 122
An Image of the Reverse Side of the Original Appears in the Copied Image
e following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals on the scanner glass” on page 51
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “Menu Options for Copying” on page 122
Multiple Originals are Copied onto a Single Sheet
The gap between originals is too small.
Solutions
When you place multiple originals on the scanner glass to copy them separately, but they are copied onto
a single sheet, place the originals at least 5 mm apart. If the problem continues, place one original at a
time.
& “Copying Photos” on page 127
Solving Problems
>
Printing, Copying, and Scanning Quality is Poor
>
Copy Quality is Poor
253
To Next Page
Loading...
