Note:
If you are using a wireless router with its default settings, the SSID and password are on the label. If you do not know the
SSID and password, see the documentation provided with the wireless router.
1.
Tap
on the home screen.
2.
Tap Wi-Fi (Recommended).
If the printer has already been connected by Ethernet, tap Router.
3.
Tap Start Setup.
If the network connection is already set up, the connection details are displayed. Tap Change Settings to
change the settings.
If the printer has already been connected by Ethernet, tap Change to Wi-Fi connection., and then tap Ye s
aer conrming the message.
4.
Tap Wi-Fi Setup Wizard.
5.
Select the SSID for the wireless router.
Note:
❏ If the SSID you want to connect to is not displayed on the printer’s control panel, tap Search Again to update the list.
If it is still not displayed, tap Enter Manually, and then enter the SSID directly.
❏ If you do not know the network name (SSID) check if the information is written on the label of the wireless router. If
you are using the wireless router with its default settings, use the SSID on the label. If you cannot nd any
information, see the documentation provided with the wireless router.
6.
Tap t he Enter Password eld, and then enter the password.
Note:
❏ e password is case-sensitive.
❏ If you do not know the password, check if the information is written on the label of the wireless router. On the label,
the password may be written "Network Key", "Wireless Password", and so on. If you are using the wireless router
with its default settings, use the password written on the label.
7.
When you have setup
nished,
tap Start Setup.
8.
Tap Close.
e screen automatically closes aer a specic length of time if you do not tap Close.
Note:
If you fail to connect, load A4 size plain paper, and then tap Print Check Report to print a connection report.
9.
Tap Close on the network connection settings screen.
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
Making Wi-
…
265