Ericsson T39 - Network Search Modes

AT Commands Phone Terminal Terminated 98
AT+CMGL List Message
<bm>:
<bm> Description
0 Store message to “BM”. No CBM indications are routed to
the TE
Default setting
2 New CBMs are routed directly to the TE, using the +CBM
result code
<ds>:
<ds> Description
0 No SMS-STATUS-REPORTs are routed to the TE
Default setting
1 SMS-STATUS-REPORTs are routed to the TE, using the
+CDS result code
<bfr>:
<bfr> Description
0 TA buffer of unsolicited result codes defined within this
command is flushed to the TE when <mode>=1 or 2 is
entered (Not yet supported)
Default setting
Description: Returns messages with status value <stat> from returned message storage <mem1> to
the TE.
Execution command: AT+CMGL[=<stat>]
Execution command
response:
+CMGL: <index>,<stat>,[<alpha>],<length>,<pdu><CR><LF>
[+CMGL: <index>,<stat>,[<alpha>],<length>,<pdu><CR><LF>
[...]]
Test command: AT+CMGL=? Shows if the command is supported.
Test command
response:
+CMGL: (list of supported <stat>s)
Parameters:
<stat>:
<stat> Description
0 Received unread (new) message
Default setting
1 Received read message
2 Stored unread message (only applicable to SMs)
3 Stored sent message (only applicable to SMs)
4 All messages
16 Template message
<index>: Integer; value in the range of location numbers supported by the associated memory.