AT Commands Phone Terminal Terminated 105
4.20.1 Commands
AT+CGSMS Select Service for MO SMS Messages
4.21.1 Commands
AT+CPBS Phonebook Storage
+CBM: 128
<128 byte PDU>
New CBM PDU of 128 byte received at TE
4.20 Ensemble S15: GSM GPRS
Description: The command is used to specify the service or service preference that the MT will use
to send MO SMS messages
Set command: AT+CGSMS=[<service>]
Read command: AT+CGSMS? Displays the current <service> setting.
Test command: AT+CGSMS=? Shows if the command is supported.
Test command
response:
+CGSMS: (list of supported <service>s)
Parameter:
<service>:
<service> Description
2 GPRS preferred
(use circuit-switched if GPRS not available)
Default setting
3 Circuit-switched preferred
(use GPRS if circuit-switched not available)
4.21 Ensemble S16: GSM Phonebook
Description: Selects the phonebook memory storage <storage> that is used by other phonebook
commands.
Note: Each one of the defined profiles corresponds to one list of allowed callers. When
<storage> is set to Callers Allowed (CA), the actual phone book storage to be used is
represented by the list of allowed callers corresponding to the active profile, see
AT*EAPS.
Set command: AT+CPBS=<storage>[,<password>]
Read command: AT+CPBS? Displays the current <storage> setting.
AT Command Response Comment
To Next Page
Loading...
