Ericsson T39 - Playing Erix

AT Commands Phone Terminal Terminated 111
AT*ECAS Callers Allowed Set
AT*ECAR Callers Allowed Read
4 Mixed ring signal
11 Melody 1
12-20 Melody 2 - melody 10
Reserved for pre-set melodies
31-38 Own melody 1-8
Description: Sets different alternatives for call screening.
Set command: AT*ECAS=<callscreen>
Read command: AT*ECAS? Displays the current <callscreen> setting.
Test command: AT*ECAS=? Shows if the command is supported.
Test command
response:
*ECAS: (list of supported <callscreen>s)
Parameter:
<callscreen>:
<callscreen> Description
0 No callers allowed. The phone invokes a CFU request to the
destination number stored for this purpose
1 All callers allowed. Normal action taken in response to
incoming call
Default setting
2 Some callers allowed. If the Calling Line Indicator (CLI)
matches the one of the entries on the white list, the call is
accepted as normal, else the call is rejected without alerting
the user
The data of the rejected call is stored as a normal missed
call, and an indication is given in IDLE mode
Description: Lists the calls allowed.
Execution command: AT*ECAR=<CAindex1>[,<CAindex2>]
Execution command
response:
*ECAR: <CAindex>[,<groupname>][,<storage>][,<PBindex>][,<CLUID>]
Test command: AT*ECAR=? Shows if the command is supported.
Test command
response:
*ECAR: (list of supported <CAindex>s),<gn_length>,(list of supported <storage>s)
Parameters:
<CAindexn>: Integer; start value of location number.
<groupname>: String; name of callers-allowed group.
<storage>:
<sound_type> Description