Ericsson T39 - 4 AT Commands Phone Terminal Terminated; Ensemble C2: Control and Identification; AT Attention Command; AT* List All Supported at Commands

AT Commands Phone Terminal Terminated 19
4 AT Commands Phone Terminal
Terminated
4.1.1 Commands
AT Attention Command
AT* List All Supported AT Commands
AT+CLAC List All Available AT Commands
4.1 Ensemble C2: Control and Identification
Description: Checks the communication between the phone and any accessory. Determines the
presence of a phone.
Execution command: AT
Description: Lists one or more lines of AT commands supported by the phone.
Execution command: AT*
Response: <AT Command1><CR><LF>
[<AT Command2><CR><LF>
[...]]
<AT Command> Description
AT... Defines the AT command, including the prefix AT
Example: AT*
AT+CGMI
AT+CGMM
AT+CGMR
...
OK
Description: Execution command causes the ME to return one or more lines of AT Commands.
Note: This command only returns the AT commands available to the user.
Execution command: AT+CLAC
Test command: AT+CLAC=? Shows if the command is supported.
Possible execution
command response(s):
<AT Command1><CR><LF>
[<AT Command2><CR><LF>
[...]]
+CME Error: <err>