Ericsson T39 - PC E-mail Integration

AT Commands Phone Terminal Terminated 76
AT*EMAR Master Reset
AT*ERIN Ring Set
Description: Requests the ME to reset user data.
Set command: AT*EMAR=<phone_lock_code>
Test command: AT*ELAN=? Shows if the command is supported.
Parameter:
<phone_lock_code>: String; security code (phone lock code) must be verified before performing the master
reset. Also see AT+CLCK.
Description: Sets the sound for incoming voice, line L1 and L2, fax and data calls, and alarm.
A sound type is selected for each call type.
Set command: AT*ERIN=<sound_type>[,<call_type>]
Read command: AT*ERIN?
Read command
response:
*ERIN: <sound_type1>,<call_type1><CR><LF>
*ERIN: <sound_type2>,<call_type2><CR><LF>
...
*ERIN: <sound_typen>,<call_typen>
Test command: AT*ERIN=? Shows if the command is supported.
Test command
response:
*ERIN: (list of supported <sound_type>s),(list of supported <call_type>s)
Parameters:
<sound_type>:
<sound_type> Description
1 Low ring signal
2 Medium ring signal
3 High ring signal
4 Mixed ring signal
11 Melody 1
12-20 Melody 2 - Melody 10
Reserved for preset melodies
31-34 Own melodies 1-4
<call_type>:
<call_type> Description
1 Line 1
Default setting
2 Line 2
3 Fax
4 Data
5 Alarm