Ericsson T39 - Receiving and Reading E-mails

AT Commands Phone Terminal Terminated 73
AT+CVIB Vibrator Mode
AT*ECAM Call Monitoring
<disp>:
<disp> Description
0 No display event reporting
Default setting
<ind>:
<ind> Description
0 No indicator event reporting
Default setting
1 Indicator event reporting using +CIEV
Only those indicator that are not caused by AT+CIND
shall be indicated by the TA to the TE
<bfr>:
<bfr> Description
0 TA buffer of unsolicited result codes defined within this
command is cleared when <mode>=’0’ or <mode>=’3’ is
entered
Default setting
Description: Enables and disables the vibrator alert function of the ME.
Set command: AT+CVIB=<mode>
Read command: AT+CVIB? Displays the current <mode> setting.
Test command: AT+CVIB=? Shows if the command is supported.
Test command
response:
+CVIB: (list of supported <mode>s)
Parameter:
<mode>:
<mode> Description
0 Disable vibrator alert function
1 Enable vibrator alert function
16 Enable vibrator alert function when silent mode is selected
Description: Activates or deactivates the call monitoring function in the ME. Also see the
unsolicited result code *ECAV.
Set command: AT*ECAM=<onoff>
Set command response:*ECAM: <ccid>,<ccstatus>,<calltype>[,<processid>][,<exit_cause>]
[,<number>,<type>]
Read command: AT*ECAM? Displays the current <onoff> setting.