AT Commands Phone Terminal Terminated 79
AT*ESIL Silence Command
AT*ESKL Key-Lock Mode
Parameters:
<place>:
<place> Description
0 Hand-held
1 Car mounted
<mode>:
<mode> Description
0 OFF, Back light always switched off
1 ON, always on
2 AUTO, backlight is turned on when the ME reacts to a user
event or when receiving a call
The light is then turned off after a short while
Description: Orders the phone to enter or leave silent mode.
Set command: AT*ESIL=<mode>
Read command: AT*ESIL? Displays the current <mode> setting.
Test command: AT*ESIL=? Shows if the command is supported.
Test command
response:
*ESIL: (list of supported <mode>s)
Parameter:
<mode>:
<mode> Description
0 Silent mode off
Default setting
1 Silent mode on
Description: Sets the key-lock mode in the phone.
Set command: AT*ESKL=<mode>
Read command: AT*ESKL? Displays the current <mode> setting.
Test command: AT*ESKL=? Shows if the command is supported.
Test command
response:
*ESKL: (list of supported <mode>s)
Parameter:
<mode>:
<mode> Description
0 MANUAL; the user has to manually lock the keyboard
Default setting