AT Commands Phone Terminal Terminated 47
AT+CLIP Calling Line Identification
3 Set only <format>
Do not attempt registration/de-registration
This value is not applicable in read command response
4 Manual/automatic
If manual selection fails, automatic mode is chosen
<format>:
<format> Description
0 Automatic (<oper> field ignored)
Default setting
1 Short-format (8 characters) alphanumeric <oper>
2 Numeric <oper>
<oper>: String; format determined by the <format> setting.
<stat>: Shows the availability status for the operator.
<stat> Description
0 Operator unknown
1 Operator available
2 Operator is currently selected
3 Operator forbidden
Example: AT+COPS=?
+COPS: (2,”Telia Mobilel”,”Mobitel”,”12345”)
+COPS: (3,”Europolitan”,”Euro”,”23456”)
OK
Two operator networks have been found. Telia Mobitel is currently selected and
Europolitan is forbidden.
Description: Requests calling line identification. Determines if the +CLIP unsolicited result code is
activated.
Set command: AT+CLIP=<n>
Read command: AT+CLIP? Displays the current <n> and <m> settings.
Test command: AT+CLIP=? Shows if the command is supported.
Test command
response:
+CLIP: (list of supported <n>s)
Parameters:
<n>:
<n> Description
0 Unsolicited result code disabled
Default setting
1 Unsolicited result code enabled
<mode> Description
To Next Page
Loading...
