Ericsson T39 - Ensemble S6: GSM Network Services; AT+CNUM Subscriber Number

AT Commands Phone Terminal Terminated 45
4.14.1 Commands
AT+CNUM Subscriber Number
2 Current air-interface user rate is 14400 bits/s
3 Current air-interface user rate is 19200 bits/s
4 Current air-interface user rate is 28800 bits/s
<coding>:
<coding> Description
0 No HSCSD call is active; see note below
4 Current channel coding is 9600 bits/s
8 Current channel coding is 14400 bits/s
Note: The value ‘0’ only applies when no HSCSD call is active. In such case, all
parameter values will be ‘0’.
4.14 Ensemble S6: GSM Network Services
Description: The command requests the subscriber number.
Execution command: AT+CNUM
Execution command
response:
+CNUM: [<alpha1>],<number1>,<type1>[,<speed>,<service>[,<itc>]]<CR><LF>
[+CNUM: [<alpha2>],<number2>,<type2>[,<speed>,<service>[,<itc>]]<CR><LF>
[...]]
Test command: AT+CNUM=? Shows if the command is supported.
Parameters:
<alphax>: Alphanumeric string. Associated with <numberx>. The character set used is selected
with AT+CSCS.
<numberx>: String; phone number of format specified by <typex>.
<typex>: String; type of address.
<speed>: Integer; data rate.
<service>:
<service> Description
0 Asynchronous modem
4 Voice
5 Fax
<itc>:
<itc> Description
0 3.1 kHz
1 UDI
<aiur> Description