Ericsson T39 - AT*EDIS Divert Set; AT*EIPS Identify Presentation Set

AT Commands Phone Terminal Terminated 58
AT*EDIS Divert Set
AT*EIPS Identify Presentation Set
Description: This command enables and disables the divert setting in the currently active profile.
The command is also used to set the divert number for the profile. The command does
not perform any call forwarding. To perform call forwarding, use AT+CCFC.
Set command: AT*EDIS=<onoff>[,<number>[,<type>]]
Read command: AT*EDIS? Displays the current <onoff>, <number>, and <type> settings.
Test command: AT*EDIS=? Shows if the command is supported.
Test command
response:
*EDIS: (List of supported <onoff>s),(list of supported <number>s),
(list of supported <type>s)
Parameters:
<onoff>:
<onoff> Description
0 Disable unconditional divert for the profile
1 Enable unconditional divert for the profile
<number>: String; phone number of forwarding address. Format specified by <type>.
<type>: Integer; type of address octet.
<type> Description
145 Default setting when dialling string includes the
international access code character ‘+’
129 Default setting when dialling string does not include the
international access code character ‘+’
Description: Enables or disables the presentation of the alpha tag (first name and last name) of the
caller ID and called ID to the TE if the ID is recognised. The presentation is performed
by unsolicited result codes, *ELIP for caller ID and *EOLP for called ID.
Set command: AT*EIPS=<ID>,<alphatag_mode>
Read command: AT*EIPS? Displays the current parameter settings.
Read command
response:
*EIPS: <ID1>,<alphatag_mode1><CR><LF>
*EIPS: <ID2>,<alphatag_mode2>
Test command: AT*EIPS=? Shows if the command is supported.
Test command
response:
*EIPS: (List of supported <ID>s),(list of supported <alphatag_mode>s)
Parameters:
<ID>:
<ID> Description
1 Caller ID (*ELIP)
2 Called ID (*EOLP)