Ericsson T39 - Ensemble S10: GSM Mobile Equipment Error Control; Ensemble S11: GSM SMS and PDU Mode; At+Cmee; AT+CSMS Select Message Service

AT Commands Phone Terminal Terminated 93
4.18.1 Commands
AT+CMEE Report Mobile Equipment Error
4.19.1 Commands
AT+CSMS Select Message Service
4.18 Ensemble S10: GSM Mobile Equipment Error Control
Description: Requests GSM mobile equipment error control. The command disables or enables the
use of result code +CME ERROR as an indication of an error relating to the
functionality of the ME. When enabled, the ME-related errors cause +CME ERROR
final result code instead of the regular ERROR final result code. ERROR is returned
only when the error is related to syntax, invalid parameters or TA functionality.
Set command: AT+CMEE=[<n>]
Read command: AT+CMEE? Displays the current <n> setting.
Test command: AT+CMEE=? Shows if the command is supported.
Test command
response:
+CMEE: (list of supported <n>s)
Parameter:
<n>:
<n> Description
0 Disable +CME ERROR result code. Use ERROR instead
Default setting
1 Enable +CME ERROR result code and use numeric <err>
values
2 Enable +CME ERROR result code and use verbose <err>
values
4.19 Ensemble S11: GSM SMS and PDU Mode
Description: Selects the message service and returns the type of messages supported by the ME. If
chosen service is not supported by the ME (but supported by the TA), +CME ERROR
is returned.
Set command: AT+CSMS=<service>
Response: +CSMS: <mt>,<mo>,<bm>
Read command: AT+CSMS? Displays the current <service>, <mt>, <mo>, and <bm> settings.
Test command: AT+CSMS=? Shows if the command is supported.
Test command
response:
+CSMS: (list of supported <service>s)