AT Commands Phone Terminal Terminated 92
MMI Configuration
This scenario shows various settings of the MMI
*ECAV: 1,3,1,, ACTIVE CALL, VOICE1
AT+CHLD Put call on hold
OK
*ECAV: 1,4,1,, HOLD, VOICE1
AT+CHLD=2 Retrieve held call
OK
*ECAV: 1,3,1 ACTIVE CALL, VOICE1
ATH Hang up
OK
*ECAV: 1,0,1,8,16 IDLE. Call Control exit cause 16 (normal clearing)
RING Incoming call
*ECAV: 1,6,128,, ALTERING, VOICE2
RING
RING
AT command Response Comment
AT*ELAN=”sv” Sets the MMI language to Swedish
OK
AT*ESAM=2 Answer mode ‘AUTO’
OK
AT*ESBL=1,1 Back light always on when phone is car mounted
OK
AT*ESIL=1 Request phone silent mode
OK Silent mode icon displayed
AT*ESKS=1 Set ‘key pressed’ sound to CLICK
OK
AT*ESMA=2 Set ‘mail received’ sound to TONE
OK
AT*ESKL=1 Set key lock mode to AUTOMATIC
OK The phone keyboard will, after a time delay, be locked
AT*ETXT=1,”Good
Evening”
New greeting text entered
OK
AT*ESMM=1 Activate minute minder during call
OK
AT command Response Comment
To Next Page
Loading...
