AT Commands Phone Terminal Terminated 80
AT*ESKS Key Sound
AT*ESMA Message Alert Sound
1 AUTOMATIC; the phone will, after a time delay,
automatically lock the keyboard
Description: Sets the key sound in the phone.
Set command: AT*ESKS=<mode>
Read command: AT*ESKS? Displays the current <mode> setting.
Test command: AT*ESKS=? Shows if the command is supported.
Test command
response:
*ESKS: (list of supported <mode>s)
Parameter:
<mode>:
<mode> Description
0 SILENT; no sound when a key is pressed
Default setting
1 CLICK; short click when a key is pressed
2 TONE, a continuous tone when a key is pressed
Description: Sets the message alert sound of the phone.
Set command: AT*ESMA=<mode>[,<mess_type>]
Read command: AT*ESMA? Displays the current <mode> setting.
Test command: AT*ESMA=? Shows if the command is supported.
Test command
response:
*ESMA: (list of supported <mode>s)
Parameters:
<mode>:
<mode> Description
0 SILENT; no sound when a message arrives
Default setting
1 CLICK; short click when a message arrives
2 TONE, a continuous tone when a message arrives
<mode>:
<mode> Description
0 All message types
Default setting
1 E-mail
2 Fax
3 SMS
<mode> Description