Ericsson T39 - Safe and Efficient Use Guidelines; Product Care and Handling

AT Commands Phone Terminal Terminated 122
AT*EPEE PIN Event
AT*ESNU Settings Number
Parameter:
<mode>:
<mode> Description
0 Microphone is disabled
1 Microphone is enabled
Default setting
Description: Requests the phone to inform when the PIN code has been entered and accepted.
This command activates the unsolicited result code *EPEV.
Set command: AT*EPEE=<onoff>
Read command: AT*EPEE? Displays the current <onoff> setting.
Test command: AT*EPEE=? Shows if the command is supported.
Test command
response:
*EPEE: (list of supported <onoff>s)
Parameter:
<onoff>:
<onoff> Description
0 Request for report on entered PIN is not activated
Default setting
1 Request for report on entered PIN is activated
Description: Sets a <type> number, in the format <number_type>, in the phone.
Set command: AT*ESNU=<type>,<number>[,<number_type>]
Read command: AT*ESNU? Displays the current parameter settings.
Read command
response:
*ESNU: <type1>,<number1>,<number_type1><CR><LF>
[*ESNU: <type2>,<number2>,<number_type2><CR><LF>
[...]]
Test command: AT*ESNU=? Shows if the command is supported.
Test command
response:
*ESNU: (list of supported <type>s)
Parameters:
<type>
<type> Description
0 Voice L1
1 Voice L2
2 Fax
3 Data
<number>: ‘0-9’, ‘+’