AT Commands Modem Terminated 188
5.8.1 Commands
AT*EINA System Interface Active
<N2>:
<N2> Description
3 Maximum number of re-transmissions
Default setting
<T2>:
<T2> Description
30 300 ms control channel response timer
Default setting
<T3>:
<T3> Description
10 10 s wake-up response timer
Default setting
<k>:
<k> Description
1-7 Window size
5.8 Ensemble C26: Accessory Identification
Description: Returns the active interface (the interface currently used for communication).
Execution command: AT*EINA
Execution command
response:
*EINA: <interface>
Test command: AT*EINA=? Shows if the command is supported.
Test command
response:
*EINA: (list of supported <interface>s)
Parameter:
<interface>:
<interface> Description
1 System connector
2 IR
3 MC link