Ericsson T39 - Data Calls; Making and Receiving Data Calls

AT Commands Phone Terminal Terminated 75
AT*ELAN Language Set
AT+CLAN Language Set
<type>: Type of address octet. Only valid for <ccstatus>=1 (CALLING).
<type> Description
145 Default setting when a dialling string includes the
international access code character ‘+’
129 Default setting when a dialling string does not include the
international access code character ‘+’
Description: Sets the language in the ME. If the language has been set to “AUTO”, the read
command returns the current language set from the SIM card. Hence, the “AUTO”
code is never returned by the read command.
Set command: AT*ELAN=<code>
Read command: AT*ELAN? Displays the current language setting.
Test command: AT*ELAN=? Shows if the command is supported.
Test command
response:
*ELAN: (list of supported <code>s)
Parameter:
<code>: Language codes defined in ISO 639. Consist of two characters, for example “sv”, “en”
etc.
<code> Description
“AUTO” Read the language code from the SIM card
“AUTO” is never returned by the read command
... Miscellaneous language codes
Description: Sets the language in the ME. If the language has been set to “AUTO”, the read
command returns the current language set from the SIM card. Hence, the “AUTO”
code is never returned by the read command.
Set command: AT+CLAN=<code>
Read command: AT+CLAN? Displays the current language setting.
Test command: AT+CLAN=? Shows if the command is supported.
Test command
response:
+CLAN: (list of supported <code>s)
Parameter:
<code>: Language codes defined in ISO 639. Consist of two characters, for example “sv”, “en”
etc.
<code> Description
“AUTO” Read the language code from the SIM card
“AUTO” is never returned by the read command
Miscellaneous language codes