EasyManua.ls Logo

Ericsson T39 - Calling Card Calls; Enabling Calling Card Service; Saving Calling Card Numbers

Ericsson T39
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AT Commands Phone Terminal Terminated 108
AT+CPBW Phonebook Write
<type>:
<type> Description
128 Unknown numbering plan, national / international number
unknown
129 ISDN / telephony numbering plan, national/international
unknown
145 ISDN / telephony numbering plan, international number
161 ISDN / telephony numbering plan, national number
128-255 Valid values, see GSM 04.08 section 10.5.4.7
<tlength>: Integer; maximum length of <findtext> field.
Description: Writes phonebook entry in location number <index> in the current phonebook
memory storage area, selected with AT+CPBS. If the <number> and <text>
parameters are omitted, the entry is deleted. If <index> is omitted but <number> is
included, the entry is written to the first free location in the phonebook.
Execution command: AT+CPBW=[<index>][,<number>[,<type>[,<text>]]]
Note: If MV, BC or HP is the currently selected phonebook storage, +CME ERROR:
<err> will be returned.
Note: DC, RC, and MC are not supported.
Note: If ME is the currently selected phonebook storage, <text> will be interpreted as
“last name” + “,” + “first name” when stored in the hierarchical phonebook.
Note: Flags may be used to indicate the contact field where the number should be
stored. If no flag is used, the phone number will be stored as of type “home”.
Note: If ME is the currently selected phonebook storage and AT+CPBW is used with
an <index> that is already used by another number, the old number will be
overwritten and removed from whatever contact it was previously a part of.
If ME is the currently selected phonebook storage and the following criteria are met:
1) AT+CPBW is used with an <index> that is part of a certain contact, and
2) all other parameters except <text> are omitted, and
3) the <text> parameter differs from the name of the contact in question,
the name of the contact will be changed.
Test command: AT+CPBW=? Shows if the command is supported.
Test command
response:
+CPBW: (list of supported <index>s),<nlength>,(list of supported <type>s),
<tlength>.
Parameters:
<index>: Integer; values in the range of location numbers of phonebook memory.
<number>: String; phone number of format <type>.
<type>:
<type> Description
128 Unknown numbering plan, national / international number
unknown

Table of Contents

Other manuals for Ericsson T39

Related product manuals