AT Commands Phone Terminal Terminated 121
4.23.1 Commands
AT+CIMI Request International Mobile Subscriber Identity
4.24.1 Commands
AT*ECUR Current Report
AT*EMIC Microphone Mode
4.23 Ensemble S19: GSM Subscriber Information
Description: Causes the TA to return <IMSI>, identifying the individual SIM attached to the ME.
Execution command: AT+CIMI
Execution command
response:
+CIMI: <IMSI>
Test command: AT+CIMI=? Shows if the command is supported.
Parameter:
<IMSI>: String without double quotes; International Mobile Subscriber Identity.
4.24 Ensemble S20: Ericsson Specific AT Commands For GSM
Description: Reports the current consumption of a connected device. The value reported is used to
adjust the phone’s charging parameters.
Execution command: AT*ECUR=<mapm>
Test command: AT*ECUR=? Shows if the command is supported.
Parameter:
<mapm>: Integer; number of milliamps, multiplied by 10 (120 mA reported as “1200”). Range:
0-65500.
Description: Enables or disables the phone microphone.
Set command: AT*EMIC=<mode>
Read command: AT*EMIC? Displays the current <mode> setting.
Test command: AT*EMIC=? Shows if the command is supported.
Test command
response:
*EMIC: (list of supported <mode>s)
To Next Page
Loading...
