AT Commands Phone Terminal Terminated 29
AT*EMIR Music Mute Indication Request
Parameter:
<mode>: Activates and deactivates the service.
<mode> Description
0 Disable analog ring signal
Default setting
1 Enable analog ring signal
Example: AT*EARS=0
OK
AT*EARS?
*EARS: 0
OK
AT*EARS=?
*EARS: (0-1)
OK
Description: This command is used to request music mute indications. A music mute indication is
sent to all accessories that have requested the indication when a call is set up. After the
call has been disconnected, a new music mute indication, *EMIV, with the <resp>
parameter set to zero is sent.
Set command: AT*EMIR=<mode>
Read command: AT*EMIR? Displays the current <mode> and <resp> settings.
Test command: AT*EMIR=? Shows if the command is supported.
Test command
response:
*EMIR: (list of supported <mode>s)
Parameters:
<mode>:
<mode> Description
0 Off; Music Mute Indication result codes will not be sent to
the accessory
1 On; Music Mute Indication result codes will be sent to the
accessory
Default setting
<resp>:
<resp> Description
0 Music Mute inactive
1 Music Mute active
To Next Page
Loading...
