Ericsson T39 - Phone Tools; Alarm Clock Functionality

AT Commands Phone Terminal Terminated 112
AT*ECAW Callers Allowed Write
AT*ESCG Create Group
AT*ESDG Delete Group
<storage> Description
“ME” ME phonebook
Default setting
<PBindex>: Integer; values in the range of location numbers in phonebook memory.
<CLUID>: LUID for contact.
Description: Writes to or removes entries from Callers Allowed list.
Execution command: AT*ECAW=[<CAindex>[,<storage>,<PBindex>]
Test command: AT*ECAW=? Shows if the command is supported.
Test command
response:
*ECAW: (list of supported <CAindex>s),(list of supported <storage>s)
Parameters:
<CAindex>: Integer; values in the range of location numbers in CA list.
<storage>:
<storage> Description
“ME” ME phonebook
Default setting
<PBindex>: Integer; values in the range of location numbers in phonebook memory.
Description: Creates a new group in the hierarchical phonebook. The group is stored in the first
available position.
Execution command: AT*ESCG=<name>
Test command: AT*ESCG=? Shows if the command is supported.
Test command
response:
*ESCG: <maxnamelength>
Parameters:
<name>: String; group name. Character set as specified by AT+CSCS.
<maxnamelength>: Integer: maximum length of the group name (in bytes).
Description: Deletes group at position <index> in the hierarchical phonebook.
Execution command: AT*ESCG=<gindex>
Test command: AT*ESDG=? Shows if the command is supported.
Test command
response:
*ESDG: (list of supported <gindex>s)